Advertisement
SoftStop
® Tangent End Terminal
STEP 5
3.81m System Rail Assembly (Post 3-8)
PARTS
C
10007537
3 EA
T
10001300
6 EA
U
10007550 24 EA
BB
10001299 30 EA
Use only Trinity Highway parts
that are speci ed herein for the
SoftStop® System for assembling,
maintaining, or repairing the
SoftStop® System. Do not utilise
or otherwise comingle parts from
other systems even if those systems
are Trinity Highway systems.
Release 06/19
1. Assemble all parts in the con guration & orientation shown above.
2. Place all System Rail panels (Part C) on the tra c side of the posts and lap
all System Rail panels in the direction of tra c as shown above using shown
hardware.
3. Tighten all threaded hardware to a snug position with an appropriately sized
wrench or socket.
Do not place anything between any post bolt head and the
SoftStop® System Rail that would prevent the bolt from
pulling through (i.e. no rectangular washers or delineators).
Failure to follow this warning could result in serious injury
or death in the event of a collision.
INSTRUCTIONS
WARNINGS
21
Advertisement
