Keypad & Lcd; Notification - CipherLab 8000 User Manual

Chapter 5 Settings
By Entry Options, you can specify what kind of information the mobile computer will show on the
screen after the entry of a data is completed and before the next data entry is proceeded with.
Options available are the count (option "Show count") and the data preview (option "Show
record"). By default, the count will display on the mobile computer screen for 600 milliseconds as
soon as an entry is completed. Refer to 1.9.11 Counter.
When selecting either "Show count" or "Show record", the options of Stay on the LCD and Press
any key to continue are available for you to either specify the time the data preview / count
displaying on the screen of the mobile computer or simply choose to show the data review / count
before a key is pressed on the mobile computer. Time-out is configured within the range of 1~99
times 100 milliseconds.
5.1.2 KEYPAD & LCD
The [Keypad & LCD] group box features the option in regard to the tone of the key click
and the LCD/keypad backlight behaviour.
The [Keypad & LCD] group box covers the options of Key Click and Backlight which are
detailed in the following:
Key Click
"Tone 2" is the default for the key click. You may select a desired tone or mute it.
Backlight
The LCD/keypad backlight is off by default. When the backlight is turned on, you may specify the
idle duration for turning off backlight. Such time-out is configured within the range of 1~9 times 10
seconds. The default time-out is 20 seconds.

5.1.3 NOTIFICATION

The [Notification] group box features the options regarding the status feedback of the
mobile computer that are detailed in the following:
Warning Beep
By this option, you can specify if to have the application template make a warning beep when a
specific event occurs. By default, the mobile computer outputs two beeps to warn you of a specific
event.
Good Read Beep
By this option, you can specify if to have a beep when a barcode is decoded successfully. By
default, the mobile computer produces one beep to inform you of a successful reading.
Vibration Duration
This option is only available for 8200/8300/8400/8500/8600/8700. You can specify if to enable the
vibrator to warn you of a specific event. The vibrator is off by default. You may turn it on for a
preset period of time.
Buzzer Volume
87