2
2.13
STEAM PRESSURE GAUGE
The steam pressure gauge assembly should be assembled in accordance with Fig. 11 using a
suitable sealant on all joints.
The gauge should be facing front towards the electrical control box and/or the operator of the boiler.
Screw the assembly into the top of the boiler and connect the copper tube from the pressure
controller located on the side of the control box to the nipple provided on the assembly.
F03210
Page 18
Steam pressure gauge
Plug
Steam cock
Pressure controller
connection point
Syphon
FIG. 11 STEAM PRESSURE GAUGE
J DUAL FUEL MANUAL 02 2014 ISSUE 9