New Patients; Function Check - Weinmann WM 24148 Device Description And Instructions For Use

• In deviation from this procedure, the bacteria filter should not be
rinsed with clean water following sterilization.

5.5 New patients

1. The particle filter must always be changed before each new patient.
2. To do so, proceed according to the section entitled "4.2 After use"
on page 24.

6. Function check

6.1 Critical times
Perform a function check at least once a month. If you find faults
during the function check you may not use the bacteria filter again
until the faults have been eliminated.
28 Function check
EN