Festo CPX-FB6 Brief Description page 15

3 Installation instructions
3.1 Fitting
Field bus node CPX-FB6 is mounted in a manifold sub-base
of the CPX terminal.
1 Screws, tightening
torque 0.9...1.1 Nm
2 Field bus node
CPX-FB6
3 Contact rails
4 Manifold sub-base
Dismantling
Remove the screws and carefully lift up the field bus
S
node.
Fitting
1. Check the seal and sealing surfaces and refit the sub-
base.
2. Place the screws so that the self-cutting threads are
used. Tighten the screws by hand in diagonally oppo-
site sequence. Tightening torque 0.9...1.1 Nm.
Festo CPX-FB6 0201NH English
1
2
3
4
15