Wiring Diagram - Siemens XDLC Installation Instructions Manual

CLASS A or CLASS X WIRING**
NO T-TAPPING ALLOWED
ZONE 1
INITIATING
DEVICE
*
CC-5
1 2 3 4
ZONE 3
INITIATING
DEVICE
*
CC-5
9 10 11 12
**OPERATES IN FULL CONFORMANCE WITH CLASS A (ULC DCLA)
Figure 4
XDLC Wiring Diagram
Siemens Industry, Inc.
Building Technologies Division
ZONE 2
*
5 6 7 8
ZONE 4
*
13 14 15 16
NOTES:
1. NO END OF LINE DEVICE REQUIRED.
2. ALL CIRCUITS SUPERVISED AND POWER LIMITED PER NEC 760.
3. POSITIVE OR NEGATIVE GROUND FAULT DETECTED AT <50K OHMS ON TERMINALS 1-16.
CLASS B WIRING***
T-TAPPING ALLOWED
ZONE 1-1
INITIATING
DEVICE
*
ZONE 1-2
INITIATING
DEVICE
*
CC-5
1 2 3 4 5
ZONE 3-5
INITIATING
DEVICE
*
ZONE 3-6
INITIATING
DEVICE
*
CC-5
9 10 11 12 13
***OPERATES IN FULL CONFORMANCE WITH CLASS B (ULC DCLB)
5
ZONE 2-3
*
SHIELD (OPTIONAL)
TERMINATE IN ENCLOSURE
WITH THE XDLC. TERMINATE
AT ONE END ONLY.
TERMINATE TO EARTH
GROUND.
ZONE 2-4
*
SHIELD (OPTIONAL)
TERMINATE IN ENCLOSURE
WITH THE XDLC. TERMINATE
AT ONE END ONLY.
TERMINATE TO EARTH
GROUND.
6 7 8
ZONE 4-7
*
SHIELD (OPTIONAL)
TERMINATE IN ENCLOSURE
WITH THE XDLC. TERMINATE
AT ONE END ONLY.
TERMINATE TO EARTH
GROUND.
ZONE 4-8
*
SHIELD (OPTIONAL)
TERMINATE IN ENCLOSURE
WITH THE XDLC. TERMINATE
AT ONE END ONLY.
TERMINATE TO EARTH
GROUND.
14 15 16
A6V101040156_en--_c