Wiring
3.1
Wiring and block diagram
This section includes the block diagram of the AI 4×TC HS module with the terminal
assignments.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
Analog input module AI 4xTC HS (6ES7134-6JD00-0DA1)
Manual, 03/2019, A5E42405270-AB
3
13