Connecting; Wiring And Block Diagram - Siemens SIMATIC ET 200SP Manual

Connecting

3.1

Wiring and block diagram

This section includes the block diagram of the communication module
IO-Link Master CM 4xIO-Link with the terminal assignments for 3-wire and 5-wire connection
of IO-Link devices or 2-wire and 3-wire connection in DI or DQ operating mode.
You can use and combine the different wiring options for all channels.
You can find information on wiring the BaseUnit in the system manual Distributed I/O System
ET 200SP (https://support.industry.siemens.com/cs/ww/en/view/58649293).
NOTICE
Internal encoder supply
Use only the supply voltage (US
communication module to supply the IO-Link device (L+/L-).
Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)
Manual, 10/2017, A5E03856846-AD
/M) made available by the IO-Link Master CM 4xIO-Link
n
3
17