Connecting
5.1
Wiring and block diagram
This section includes the block diagrams of the AI 2xSG 4-/6-wire HS module with pin
assignment for a 4-wire connection and for a 6-wire connection.
For more information on wiring the BaseUnit, refer to the System Manual ET 200SP Distributed
I/O System (http://support.automation.siemens.com/WW/view/en/58649293).
Note
You may use and combine the different wiring options for all channels.
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind also
during the configuration.
Analog input module AI 2xSG 4-/6-wire HS (7MH4134-6LB00-0DA0)
Manual, 09/2018, A5E41867508A-AB
5
19