JLG 1200SJP Service And Maintenance Manual page 99

19. Assemble the 1st reduction assembly (16).
20. Insert the 1st stage sun gear (10).
21. Assemble the O-ring seal (9) into its seat in the end
cover (7).
3121142
SECTION 3 - CHASSIS & TURNTABLE
22. Place the end cover (7) on the gearbox housing (23).
23. Tighten the 10 socket head screws M10x25 (1),grade
12,9, by a torque wrench at 62.7 ft.lbs. torque (85 Nm).
24. Insert the plugs (6) into the oil draining-filling holes of
the end cover (7). Torque the plugs to 52 ± 7 ft.lbs.
(70±10 Nm).
3-49