JLG 1200SJP Service And Maintenance Manual page 31

C: Wheel Drive Hub - Reggiana Riduttori (S/N 134389 to
Present)
Lube Point(s) - Level/Fill Plug
Capacity - 0.5 quarts (0.5 liters) ± 10%
Lube - EPGL
Interval - Change after first 150 hours then every
hours of operation
Comments - Place Fill port at 12 o'clock position and
Check port at 3 o'clock position. Pour lubricant into fill
port until it just starts to flow out of check port.
5. Hydraulic Return Filter
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and every 300
hours thereafter or as indicated by condition indicator.
6. Hydraulic Charge Filter
Lube Point(s) - Replaceable Element
Interval - Change after first 50 hours and every 300
hours thereafter or as indicated by condition indicator.
3121142
7. Hydraulic Oil
1200
Lube Point(s) - Fill Cap
Capacity - 55 gallons (208 liters) Tank
Lube - HO
Interval - Check level daily. Change every 2 years or 1200
hours of operation.
8. Suction Strainers (In Tank)
Lube Point(s) - 2
Interval - Every 2 years or 1200 hours of operation.
Remove and clean at time of hydraulic oil change.
SECTION 1 - SPECIFICATIONS
FULL LEVEL (HOT OIL)
FULL LEVEL (COLD OIL)
1-9