Clip Retention Anchors; Board Level Component Keep-Out Dimensions; Figure 15. Heatsink Retention Mechanism Layout - Intel E7500 Thermal Design Manual

Reference Thermal Solutions
6.3.6

Clip Retention Anchors

For E7500/E7505 chipset-based platforms that have very limited board space, a clip retention
anchor has been developed to minimize the impact of clip retention on the board. It is based on a
standard three-pin jumper and is soldered to the board like any common through-hole header. A
new anchor design is available with 45° bent leads to increase the anchor attach reliability over
time. See Appendix A for the part number and supplier information.
6.3.7

Board Level Component Keep-out Dimensions

The locations of hole patterns and keep-out zones for the reference thermal solution are shown in
Figure 15 and Figure 16.

Figure 15. Heatsink Retention Mechanism Layout

2.398
NOTES:
1. Dimensions are in inches.
2. Not to scale.
28
2.218
MCH
2x 1.109
®
Intel E7500/E7505 Chipset MCH Thermal Design Guide
R
2x 1.199
850_Anchor_Lay