Elcometer 355 Operating Instructions Manual page 47

R
Now press [5] and [6]. The display will show:
Press [CLEAR] to remove the batch number from the display.
Press [1] [2] [3] and [ENTER] to create batch 123.
Take readings into batch 123 and use [DEL] to delete the last reading. Note how the readings and value
displays update.
Repeat the base routine (from section 17.5) within the batch and take some more readings.
17.8 To review the batch
Press [BATCH] and [.]
The display will flash the time and date. This is for the time and date the batch was
opened.
Press [>] once to show the probe module information. Then press [>] to review the
batch from reading 1. Use [<] and [>] to move backwards and forwards through
the batch.
To exit review mode, press [ENTER] twice or [Esc] twice.
17.9 To see which batches exist
Press [BATCH] and repeat to show each batch number in the order in which they were entered.
45