Table of Contents
Advertisement
R
right angles to the substrate to avoid any errors that are introduced by variations in these parameters. The
probe can be used without the grip where the smaller diameter probe is advantageous, but some effect on
accuracy may result from the probe twisting between measurements or not being truly set at right angles to
the substrate. If a replacement Hand Grip is required, use Sales Part Number T35512026.
14.4 Probe placement jig
A probe stand which can be used to position a range of probes on small components is available. Use Sales
Part Number T95012880.
14.5 Protective covers
The Elcometer 355 is supplied with some clear plastic, disposable sheets which protect the unit from
overspray. Additional covers are available in lots of 10. Use Sales Part Number T35512051.
14.6 Re-chargeable batteries
The Elcometer 355 can be operated using 3 x 1.2 V nickel metal hydride (NiMH) cells which are charged
externally. Suitable chargers are available for all voltage options.
14.7 Dry batteries
The Elcometer 355 can be powered by 3 x 1.5 V (LR6) AA alkaline cells. Zinc carbon batteries will give a
shorter operating life.
14.8 Headphones/earpiece
The Elcometer 355 has a 3.5mm jack socket fitted to the top end plate next to the 25 way D socket. This
may be used with an earpiece with volume control (Part No. T35512220) or with headphones (Part No.
T35512216) so that the beeper signals can be heard in high ambient noise environments.
40
Hide quick links:
Advertisement
Table of Contents
