Cast Faceplate Installation - Regency Alterra CI1150 Owners & Installation Manual

Cast Faceplate Installation

1) Open the door to about 45°- then remove it from the hinge by lifting
up and out. Put door to the side on a soft surface.
Note: Door is heavy.
2) Install the operating handle storage/draft control bracket on the top
left side of the faceplate (facing the back of the unit) using one screw,
as shown below.
Page 1 of 1
920-162
CAST FACEPLATE INSTALLATION
Stop! Read Carefully.
Cast components are very fragile. Use extreme care when handling.
I1200 CONTEMPORARY
157-500.SLDASM
3) Remove two bolts from the bracket on the unit as shown below.
Line up the left side casting bracket with the left side bracket on the
unit.
4) Install fan controls into left surround with 2 screws as shown below.
Note: Left side faceplate (when facing unit) will have a notch on the side
as shown below. The extension cord should also be brought out to
the side prior to installation.
5) Secure the left cast surround with the two bolts removed in Step 3.
1
CI1150
installation
10/15/2019
Regency CI1150 Wood Cast Insert
| 11
10/21/19