Safety Instructions - Beko CLEARPOINT 3eco S040 Installation And Operation Manual

Installation and operation manual

2.2 Safety instructions

In order to prevent accidents, personal injury and damage to the device as well as impairments during operation, it is
essential to adhere to the specified safety and warning notices.
The personal protective equipment specified in the safety instructions must be selected and made available by the
operating company depending on the system parameters and properties.
DANGER Operation of plant outside the permissible limit range!
Operation of the product outside the permissible limits and operating parameters, unauthorised
intervention and modifications may result in death or serious injury.
•
•
•
DANGER Pressurised system!
Death or serious personal injury can result through contact with fast or suddenly escaping
compressed air or through bursting system parts
•
•
•
•
•
•
•
•
•
•
DANGER Use of incorrect spare parts, accessories or installation materials!
The use of incorrect spare parts, accessories or installation materials, as well as auxiliary and
operating materials, may result in death or serious injury. In addition, functional and operational
malfunctions or material damage can occur.
•
•
•
WARNING Non-application of personal protective equipment!
Non-application of personal protective equipment or the use of sub-standard protective
equipment can lead to accidents or personal injuries during work on the product.
•
•
WARNING Insufficient qualification!
Insufficient qualification of the personnel can lead to accidents, personal injury and damage to
the device as well as impairments during work on the operating material.
All work on the product may only be carried out by appropriately qualified skilled personnel.
For safe operation of the product, always adhere to the limit values, operating parameters
and maintenance intervals as well as the set-up and ambient conditions specified on the type
plate and in the manual.
Inspect whether the operating parameters have been amended or restricted by the use of
accessories.
Only use the product for its intended use.
All work on the system must be carried out in the depressurised state and with the system
secured against unintentional pressure build-up.
Set up a safety zone around the system during all assembly, installation, maintenance and
repair work.
Before applying pressure to the system, check all pipe connections and tighten if necessary.
Slowly pressurise the system with compressed gas.
Avoid pressure blows and high differential pressures.
Assemble all pipes without mechanical stress. Avoid any vibrations occurring in the pipe
network by using vibration dampers.
Always keep exactly to the installation and operating instructions given in this manual.
Always keep inspection and maintenance interval exactly.
Install fixed pipes as supply and discharge pipes.
Do not carry out any structural changes to the product.
For all installation, servicing and maintenance work, only use undamaged original parts,
auxiliary and operating materials which are specified by the manufacturer.
Only use fittings and connecting elements approved for the respective application as well as
suitable tools in perfect operating condition.
Only use cleaned pipes that are free of dirt and corrosion.
The personal protective equipment recommended, which must be in a flawless condition,
must be worn during all work on the product.
Inspect the personal protective equipment regularly for flawlessness and functionality and
replace damaged parts immediately.
CLEARPOINT 3eco coalescing filter
®
11 | 56