CLEARPOINT
®
3eco
coalescing filter
9.5 Replace the filter element
For filter element replacement to be carried out, the following prerequisites must be fulfilled and the preparatory tasks
must have been completed.
Tools
•
Screwdriver - cross-head
size 2.5 mm
1.
Open the bypass pipe if available
1.
36 | 56
•
New filter element
Preparation of installation
Figure
Prerequisites
Material
Description
1.
1. Close the shut-off valves upstream and downstream
of the filter or the respective system section and
depressurise the filter
2. When the BEKOMAT
from the filter base.
For further information see the enclosed installation and
operating manual for the BEKOMAT
Installation and operation manual
Protective equipment
•
Protective gloves (fluid-
resistant)
•
Safety goggles with side shields
•
Hearing protection
•
Respiratory protection,
protection class FFP 3
•
Safety footwear
is used, it must be disconnected
®
®