Intended Use - Beko CLEARPOINT 3eco S040 Installation And Operation Manual

Installation and operation manual

1.5 Intended use

CLEARPOINT filters and accessories
®
The CLEARPOINT 3eco coalescing filter, also referred to as filter below, is used for the filtration of aerosols and solid
®
particles in compressed gas systems.
Any use of this system other than the use described in this manual is hereby deemed to be non-intended and can cause a
hazard for the safety of people and the environment.
• Only use filters and accessories within the operating parameters given in the technical data and the agreed delivery
conditions.
• Only use filters and accessories within a pipeline system designed for the technical data with appropriate
connections, pipe diameters and assembly clearance.
• Only use the filters and accessories for the treatment of compressed gases of fluid group 2 according to Pressure
Equipment Directive 2014/68/EU which are free of aggressive and corrosive components.
• Only use filters and accessories in non-explosive hazardous areas.
• Only use filters and accessories away from direct solar radiation and heat sources as well as areas subject to frost.
• Only combine the filters and accessories with the products named and recommended by
BEKO TECHNOLOGIES GMBH in the manual.
Before using the filters, the operating company must make sure that all conditions and prerequisites for intended use are
given.
The filter is exclusively designed for stationary use in a commercial or industrial area. All the assembly, installation,
operation, disassembly and disposal work described may only be performed by qualified skilled personnel.
CLEARPOINT 3eco coalescing filter
®
7 | 56