Case (Optional) Battery Cradle Guide Note: Yealink W76P DECT IP phone consists of one W70B base station and one W56H handset. Assembling the DECT Phone 1. Connect the base station power and the network using method a or method b.
2a. (Desktop Installation) Attach and remove the base stand. Attach the Base Stand Remove the Base Stand Align the snap-fits with the corresponding Remove the snap-fits from the holes and push forward, snapping them holes horizontally. into the holes. 2b. (Wall-Mount Installation) Attach the base station. 3.
Page 5
5. (Optional) Mount the charging cradle to the wall. 36mm 6. Connect the charging cradle and charge the handset. Note: • Use Yealink-supplied power adapter (5V/0.6A). A third-party power adapter may damage the handset. • Check the charging status on the top-right corner of the LCD screen.
Page 7
We are not liable for problems with Yealink device arising from the use • Use only the rechargeable battery pack delivered with the handset or those rechargeable battery packs of this product;...