Ignition System - Husqvarna 131RB Workshop Manual

a) On the model 967 84 33-xx
A
b) On the model967 84 32-xx
4. Examine the drive. Clean the drive if it is dirty.
Replace the drive if it is damaged.
5. Assemble in the opposite sequence to how it was
disassembled.

8.4 Ignition system

8.4.1 To disassemble the ignition system
1. Pull up the knob and remove the shaft.
2. Remove the spark plug cover.
3. Remove the cylinder cover.
4. Remove the air filter cover (only on the model 967
84 32-xx).
5. Disconnect the throttle wire from the carburetor.
627 - 002 - 23.04.2018
a) For the model 967 84 33-xx: Open the holder
and disconnect the throttle wire from the
carburetor connection.
b) For the model 967 84 32-xx: Remove the cap
A
and disconnect the throttle wire.
Repair instructions - 29