Wireless Planning - Emerson Rosemount 1410S Quick Start Manual

Wireless gateway

Hide thumbs Also See for Rosemount 1410S:

June 2023

Wireless planning

1.1

Power up sequence

The gateway should be installed and functioning properly before

power modules are installed in any wireless field devices. Wireless

field devices should also be powered up in order of proximity from

the gateway beginning with the closest. This will result in a simpler

and faster network installation.

1.2

Gateway redundancy

If the wireless gateway was ordered with redundancy (Gateway

Redundancy code RD), refer to Appendix D in the Emerson

Wireless 1420 Gateway

instructions.

1.3

Gateway firmware compatability

The gateway firmware needs to be compatible with host connections

being made. Verify that gateway firmware and host firmware (e.g.

Security Setup Utility (SSU) and Plantweb Insight) are compatible

before commissioning.

Quick Start Guide

Reference Manual

Quick Start Guide

for additional installation

Table of Contents