Vertical Speed (Vs) Display; Flight Director Vs Target Display And Bug - Honeywell PRIMUS 1000 Pilot's Manual

VERTICAL SPEED (VS) DISPLAY

The VS display is shown in figure 4--26. Refer to the figure for the
location of annunciations described below.
TCAS STATUS
WHITE
TCAS TEST
TCAS OFF
TA ONLY
FLIGHT DIRECTOR
VS VISUAL TARGET
Flight Director VS Target Display and Bug -- Engaging the
D
vertical speed mode brings the VS target bug into view. The VS
target bug moves along the right side of the VS scale. The bug lines
up with the value on the VS scale that is set with the guidance
controller. The bug is always cyan. The digital readout of the target
is displayed on top of this vertical speed scale. The target comes
from the flight guidance system.
NOTE: When the flight level change (FLC) FD mode is used in a
descent, the vertical speed bug and target display are
positioned at the preprogrammed rate of descent value.
A28--1146--112--00
AMBER
TCAS TEST
TCAS OFF
TA ONLY
VERTICAL
SPEED ANALOG
SCALE
DISPLAY
Vertical Speed Display
Figure 4--26
PRIMUSr1000 Integrated Avionics System
FLIGHT DIRECTOR
VS TARGET
BUG
TCAS " FLY--TO"
ZONE
CURRENT VERTICAL
SPEED DISPLAY
TCAS " NO--FLY"
ZONE
Electronic Flight Instrument System (EFIS)
AD--50920--R1@
4-51