Controls; Primary Flight Display (Pfd) Bezel Controller; Std (Standard) Button; Baro (Barometric) Set Knob - Honeywell PRIMUS 1000 Pilot's Manual

CONTROLS

Primary Flight Display (PFD) Bezel Controller

The PFD bezel controller shown in figure 4--2, is used to control various
elements on the PFD.
IN/HPA Button -- The IN/HPA button is used to set the barometric
D
altimeter correction in inches of mercury (inHg), or hectopascals
(hPa). Power up is with IN selected.
Inclinometer -- The ball in the glass track is used to indicate a slip
D
or skid flight condition.
STD (Standard) Button -- Pushing the STD button, returns the
D
barometric altimeter correction to standard value (29.92 inHg or
1013 hPa).
BARO (Barometric) SET Knob -- The BARO SET knob is used to
D
enter the barometric altimeter correction in either inHg or hPa.
NOTES: 1. When the pilots are displaying cross--side micro air
2. The BARO set function is independent from the DC
A28--1146--112--00
PRIMUSr1000 Integrated Avionics System
PFD Bezel Controller
Figure 4--2
data computer (MADC) data on their PFD, they do
not have control over the displayed BARO setting
from their respective DC.
and does not require that the DC be functional to
set data.
Electronic Flight Instrument System (EFIS)
AD--50895@
4-5