Advisory Messages (Cyan); Cyan Advisory Messages - Honeywell PRIMUS 1000 Pilot's Manual

PRIMUSr1000 Integrated Avionics System

ADVISORY MESSAGES (CYAN)

The cyan message flashes on the CAS display for 5 seconds, and then
goes steady. No pilot interaction is required to acknowledge this type
of message.
If there are cyan messages already on the CAS display when a new
cyan message becomes active, the new message is displayed at the
top of the cyan message stack. If the existing amber or cyan messages
are scrolled off the display, the cyan message stack is brought back on
the CAS display with the new message displayed a the top of the stack.
Cyan messages are removed from the CAS display when the condition
that caused the message is remedied. The cyan advisory messages
are listed in table 5--20.
All cyan messages are inhibited for takeoff and landing.
AHRS1 BASIC MODE
AHRS2 BASIC MODE
APU FUEL SOV CLSD
BLD 1 VLV CLSD
BLD 2 VLV CLSD
CHECKLIST MISMATCH
CMC FAIL
CROSS BLD OPEN
DAU 1 B FAIL
DAU 1 REVERSION
DAU 2 B FAIL
DAU 2 REVERSION
DU 1 FAN FAIL
DU 2 FAN FAIL
DU 3 FAN FAIL
DU 4 FAN FAIL
DU 5 FAN FAIL
E1 ADC DATA FAIL
E1 FADEC FAULT
E1 FUEL IMP BYP
E1 FUELSOV CLSD
E1 HYD PUMP FAIL
E1 HYD SOV CLSD
E1 IDL STP FAIL
Engine Instrument and Crew Alerting System (EICAS)
5-28
E1 OIL IMP BYP
E2 ADC DATA FAIL
E2 FADEC FAULT
E2 FUEL IMP BYP
E2 FUELSOV CLSD
E2 HYD PUMP FAIL
E2 HYD SOV CLSD
E2 IDL STP FAIL
E2 OIL IMP BYP
FLAP LOW SPEED
FUEL XFEED OPEN
GEN 1 BRG FAIL
GEN 2 BRG FAIL
GEN 3 BRG FAIL
GEN 4 BRG FAIL
HYD1 LO QTY
HYD EPUMP FAIL
HYD PUMP SELEC OFF
IC 1 FAN FAIL
IC 2 FAN FAIL
ICE CONDITION
PACK 1 VLV CLSD
PACK 2 VLV CLSD

Cyan Advisory Messages

Table 5--20
A28--1146--112--00