Checklist Menu; M/P Rng Knob - Honeywell PRIMUS 1000 Pilot's Manual

M/P RNG Knob -- The pilot uses the map/plan range knob to change
D
the range scale when in the map or plan display mode.

CHECKLIST MENU

Pushing the CKLST button on the main menu (shown in figure 4--8),
displays the checklist menu on the MFD, as shown in figure 4--13.
NOTES: 1. The checklist can be selected for display on either
2. When the checklist display is selected for the first time
3. Normal
4. To switch from one procedures index to another (for
A28--1146--112--00
MFD. However, if it is displayed on one, the menu item
CKLST is removed from the other MFD and, therefore,
cannot be selected on that MFD.
(after power--up) the checklist disclaimer page is
shown. Push PAG to go to the master index of
procedures.
procedures,
abnormal procedures and waypoint listing indices (as
available) are selectable with the SKP (skip) button
from the checklist menu first displayed. Once the
procedures index is selected, the checklist display lists
all the procedures in that index.
example, to go from NORMAL to EMERGENCY)
select the checklist menu first displayed, and make the
proper selection.
Checklist Menu
Figure 4--13
PRIMUSr1000 Integrated Avionics System
emergency
Electronic Flight Instrument System (EFIS)
procedures,
AD--50905@
4-15