Localizer Capture Display - Honeywell PRIMUS 1000 Pilot's Manual

Lateral gain programming is required to adjust the gain applied to the
localizer signal due to the aircraft approaching the localizer antenna,
and beam convergence caused by the directional qualities of the
antenna.
The localizer mode is cancelled with any one of the following actions:
Pushing the NAV button on the GC
D
Changing the displaced heading source or NAV source
D
Selecting go--around
D
Selecting the heading select mode
D
Pushing the CPL button on the GC
D
Deselecting an SG reversionary selection.
D
A28--1146--112--00
PRIMUSr1000 Integrated Avionics System
CRS

Localizer Capture Display

Figure 8--12
Modes of Operation
8-15