Mfd Bezel Controller Basic Operation; Submenu Selection; Toggle Selection - Honeywell PRIMUS 1000 Pilot's Manual

MFD BEZEL CONTROLLER BASIC OPERATION

The MFD bezel controller shown in figure 3--2, gives the pilot access to
a variety of supplemental information through the menu item keys and
rotary knob. Menu item selections are sent to the respective display
controller. If one fails, the remaining display controller transmits the
bezel controller commands.
When the desired menu is displayed, the menu item keys are used to
do the following functions:
Submenu Selection -- This selection, sequences through possible
D
choices with that specific menu item key.
Toggle Selection -- This selection, sequences through possible
D
choices with that specific menu item key.
Momentary Selection -- The menu item is selected as long as the
D
menu item key is held.
Parameter Display Selection -- Pushing the menu item key boxes
D
the menu item, and the parameter is displayed on the MFD.
Sometimes pushing another menu item key boxes the previous
menu items and the previous parameter is displayed on the MFD.
Settable Parameters -- When this type of menu item is available,
D
dashes are displayed around the menu item. The rotary knob on the
bezel controller is used to dial in the proper value. When the knob
is turned, the dashes are replaced with the desired value.
A28--1146--112--00
PRIMUSr1000 Integrated Avionics System
MFD Bezel Controls
Figure 3--2
AD--51639@
Electronic Display System (EDS)
3-5