Ils Approach Mode Procedure - Honeywell PRIMUS 1000 Pilot's Manual

Step
1 Couple either the pilot' s or copilot' s flight director to the
autopilot using the CPL switch on the GC.
2 Tune the coupled side navigation receiver to the published
ILS frequency for the runway in use.
3 Push the NAV button on the coupled side DC to select ILS
as the navigation source.
4 Set the radio altitude (RA) minimum altitude (MIN) on the
PFD with the RA knob on the DC.
5 Set the course pointer and heading bug on the coupled
side PFD for localizer intercept, using the GC HDG and
CRS knobs.
6 Push the APR button on the GC. The PFD annunciates, as
shown in the display below.
LOC in white
D
GS in white
D
HDG in green.
D
A28--1146--112--00
Procedure
M

ILS Approach Mode Procedure

Table 8--6 (cont)
PRIMUSr1000 Integrated Avionics System
30 30
30 30
AD--50990--R1@
Modes of Operation
8-21