Multifunction Display (Mfd) Bezel Controller; M/P Rng (Map/Plan Range) Rotary Knob; Menu Inop - Honeywell PRIMUS 1000 Pilot's Manual

PRIMUSr1000 Integrated Avionics System

Multifunction Display (MFD) Bezel Controller

The MFD bezel controller is shown in figure 4--3.
The MFD bezel controller accesses several display menus and
submenus. The selections from these menus are described later in this
section.,
NOTE: When the SG reversionary switch selects the cross--side SG,
only the DU bezel buttons on the same side as that symbol
generator, are used to make MFD/EICAS selections.
M/P RNG (Map/Plan Range) Rotary Knob -- The rotary knob
D
normally controls the range of the map or plan display in preset
increments. The same menu select buttons change the knob
function to set specific flight parameters. When weather is selected
for display, the weather controller controls range.
MENU INOP (Inoperative) -- This annunciation shown in figure 4--4,
D
is displayed when the DC is inoperative.
Electronic Flight Instrument System (EFIS)
4-6
MFD Bezel Controller
Figure 4--3
Menu Inop Display
Figure 4--4
AD--51639@
AD--51640@
A28--1146--112--00