Basic operating procedures
Basic operating procedures
Switching to quick-menu mode
Press the »
« for longer than 1 second but less than
M
3 seconds to open the quick menu.
Information on the status and the settings of the transmit-
ter can be queried here, see page 52.
Switching to menu mode
Press the »
« for longer than 3 seconds.
M
You will then be prompted for the password.
Entering the password
In measuring mode:
Press the »
« for longer than 3 seconds.
M
You will then be prompted for the password.
Use the »
« key to move to the line
M
» Enter password «
and press the »
« key.
OK
The password entry screen appears.
Use the »
« and »
OK
positions of the password and press the »
confirm each position.
— After you have confirmed the last position, the menu cor-
responding to the entered password is opened.
If the entered password is invalid, a suitable error mes-
sage is displayed.
50
« keys to set each of the four
« key to
M
back to mesure
Instrument
Sensor
Datalogger
1/3
Back to measure
Enter password
2/3
Password
_ _ _ _
2/3
Password
0 _ _ _
3/3
back to mesure
Wrong pwdlevel
9 9 9 9
Enter password