Errors And Actions To Be Taken - Hitachi SV.LINK User Manual

7 MAINTENANCE

7.3 Errors and Actions To Be Taken

7.3.1 CPU LED display messages
In the S10mini, when an event or error occurs in the SV.LINK module, the corresponding
message shown in the following table is displayed on the indicator of the CPU module. The
contents of display are classified by main setting and sub setting of the SV.LINK module.
In the S10V, error information is collected but an error is not displayed on the LPU module.
The collected error information can be referenced from the tool system. For details, see "7.3.2
Hardware errors" and "7.3.3 Communication error codes."
Module Display message
Main SVM @. @
SVM □□□□ A hardware error was detected on the
Sub SVS @. @
SVS □□□□ A hardware error was detected on the
The "@. @" above indicates the version and revision of the SV.LINK module.
The "□□□□" indicates the error display data in "7.3.2 Hardware errors."
Explanation
The SV.LINK module (main) was started
up normally.
board of the SV.LINK module (main).
The SV.LINK module (sub) was started
up normally.
board of the SV.LINK module (sub).
7-8
User action
This is not an error.
See "7.3.2 Hardware
errors."
This is not an error.
See "7.3.2 Hardware
errors."