Table of Contents
Advertisement
During work
For each procedure, follow the given sequence of steps.
Use the special tools and instruments, specified for the work in the manual or
commercially available tools and instruments which fit the purpose.
Use measurement instruments and powered tools which are properly calibrated or
periodically inspected.
Keep the maintenance area neat and tidy.
Always put away parts, materials or tools when not in use.
Wear an eye protector where anything may fly about.
When using sharp objects or cutting tools, make sure that no part of your body lies in
the path of the blade bit, or point.
Before finishing your work, make sure that all parts removed during maintenance
have been installed back in their original positions in the machine.
Make sure that no tool or foreign material is left in the machine.
S-3
Advertisement
Table of Contents
