Ip Address And Subnet Mask Setting; Figure 4-4 [Et.net System] ([[S10V] Et.net]) Window - Hitachi SV.LINK User Manual

4 OPERATION

4.3.2 IP address and subnet mask setting

Function: Set the IP addresses and subnet masks of the main module and the sub-module.
Operation: The operating procedure is shown below.
(1) Start up the [ET.NET SYSTEM] ([S10V] ET.NET) window. Set "IP address" and "Subnet
mask."
(This window is displayed when no submodule is mounted.)

Figure 4-4 [ET.NET SYSTEM] ([[S10V] ET.NET]) Window

4-9