Start-Up Procedure - Hitachi SV.LINK User Manual

4 OPERATION

4.1 Start-up Procedure

Start
Mount the module.
Set rotary switch.
Start up CPU.
Start up ET.NET system.
(ET.NET system for
Windows®)
Set up module.
Reset CPU.
End
Start up the system according to the following
procedure.
[1] Switch off the CPU or LPU power supply and
mount the SV.LINK module.
[2] Set the module number setting switch of the
SV.LINK module according to the following table.
Switch setting
Main Sub
0 1
2 3
4 5
6 7
8 9
A B
C D
E F
[3] Switch on the power supply of the 10mini CPU
unit or S10V LPU unit.
[4] Connect the CPU or LPU to the tool system by the
RS-232C interface cable and start up the ET.NET
system or S10V ET.NET system.
[5] For the SV.LINK module, set the IP address or
subnet mask as required.
[6] Reset the CPU or LPU or switch on and off the
power supply. Press the reset switch of the CPU
for one second or more.
4-2
Contents
10BASE-5 communication
10BASE-T communication
Error
Error
Error
Error
Error
Error