Table of Contents
Advertisement
2.
Hazard Warning Statements
The following are the hazard warning statements contained in this manual.
2.1 NOTICE Statements
(chapter 1, page 1-2)
LQE521 can be used with the SV.LINK module (LQE021) dedicated to the
S10mini, when used in the CPU unit of the S10mini (though LQE021 cannot
be used in the LPU unit of the S10V).
When used in the LPU unit of the S10V, LQE521 cannot be used with the
ET.NET module (LQE720) (but can be used with LQE520).
(chapter 1, page 1-3)
When using 10BASE-5 connections, a 12-VDC external power supply is required.
(chapter 1, page 1-4)
The physical line between the S10mini or S10V and MELSEC must be
exclusively used for high-speed I/O communications. Ensure that nothing is
connected to the physical line except for the S10mini or S10V and MELSEC.
When using two high-speed I/O communication channels, provide a physical
line for each channel.
(chapter 1, page 1-6)
User of this product must have adequate knowledge of the Windows®
environment and user interface. This system conforms to the Windows®
standard. This manual is prepared for users who are familiar with the basic
Windows® operating procedures.
NOTICE
NOTICE
NOTICE
NOTICE
S-6
Advertisement
Table of Contents
