Festo MH1 Series Brief Description page 14

2 Fitting
2.1 Soldering sockets
– Drill the contact holes for the soldering sockets in your
printed circuit board. The dimensions for the contact
holes are shown in the following diagram.
– Insert the soldering sockets in the printed circuit
board.
– Solder the contacts to the printed circuit board.
Dimensions for the soldering sockets
***
*
*) ± 0.1 mm **) ± 0.05 mm
14
**
*
* *
*
***) + 0.1 mm
Festo MH1..-PCB 0108NH English
~1.5