Mounting The Machine To A Work Bench; Mounting The Sanding Disc - Westfalia RBDS-46A Instruction Manual

The sander is delivered partly disassembled for shipping. Therefore, the machine
requires some assembly before it can be operated.
Before undertaking any work on the machine, make sure it is not connected to the
power mains!

Mounting the Machine to a Work Bench

1. Mount the machine to a workbench or another solid structure.
2. Bolt the base unit to the worktop. Use at least M6 screws and make sure
there is enough room for machining longer work pieces.

Mounting the Sanding Disc

Sanding Disc Cover (32)
1. Attach the sanding disc centred to the sanding disc carrier.
2. After you have made sure the disc is centred, firmly press it down against the
carrier.
Operation
Sanding Disc Cover (Plastic)
adjustable
Tighten Screws only lightly
Sanding Disc Cover (Metal)
Fixed at the Housing
16
Sanding Disc
Carrier (33)
Sanding Disc
self-adhesive (27)
Mounting
Hole