Mounting The Fence; Attaching The Sanding Table For The Sanding Disc - Westfalia RBDS-46A Instruction Manual

Please Notice! Use only self adhesive sanding discs or dedicated glue for
sanding discs.
3. First attach the sanding disc cover (metal), and than attach the plastic cover
and use two screws (31, see part list) to attach them. Tighten the screws only
lightly.
4. The metal cover must fit into the notch low in the housing. The plastic cover
must later be adjusted according to the position of the work table. This way, it
is not possible to touch the disc below the table.

Mounting the Fence

The fence can be used to precisely guide the work piece on the belt sander.
1. Mount it, with the hex screw, spring washer and washer (6, 7, 8, see part list).
2. Carefully tighten the screw.

Attaching the Sanding Table for the Sanding Disc

1. First, attach the table support (36) to the sanding table (35).
Operation
17
Fence (9)
Spanner