Pepperl+Fuchs Ecom Tab-Ex 01 DZ2 Safety Instructions page 18

Charging with the charger
Connect the USB cable to the USB power adaptor and then plug the end of the
USB cable into the multipurpose jack.
Connecting the charger improperly may cause serious damage to the device.
Any damage caused by misuse is not covered by the warranty.
• The device can be used while it is charging, but it may take longer to fully
charge the battery.
• If the device receives an unstable power supply while charging, the touch
screen may not function. If this happens, unplug the charger from the device.
• While charging, the device may heat up. This is normal and should not affect
the device's lifespan or performance. If the battery gets hotter than usual, the
charger may stop charging.
• If the device is not charging properly, take the device and the charger to a
Ecom Service Centre.
After fully charging, disconnect the device from the charger. First unplug the
charger from the device, and then unplug it from the electric socket.
18