Summary of Contents for Premier Mounts SpiroLock SPI-PRO
Page 1
INSTALLATION INSTRUCTIONS SPI-PRO SpiroLock™ Universal Projector Mount For 1½” NPT NORTH AMERICA EUROPE 3130 East Miraloma Avenue Swallow House, Anaheim, CA 92806 USA Shilton Industrial Estate, USA and Canada Shilton, Coventry, England CV79JY Phone: 1.800.368.9700 Phone: +44 (0) 2476 614700 Fax: 1.800.832.4888 Fax: +44 (0) 2476 614710 Other Locations...
PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY...
Ladder Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700. SpiroLock™ For 1½” NPT Hardware SpiroLock™...
Allows the user to easily secure the mount mounting legs allow for multiple with a padlock or a steel-cable locking system mount configurations. (PCB-CSL1). Page 4 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
See the Premier Mounts Website at www.mounts.com for compatible ceiling adapters. Read these installation instructions thoroughly before attempting to install the Premier Mounts product. Familiarize yourself with the contents of the package and make sure you have all the parts and tools you need to safely complete the installation.
‘wedging’ to take place, thereby reducing the likelihood of the material being split. It also reduces the possibility of the screw head getting sheared off by torque. Page 6 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
Page 7
Do not overtighten the Lock-It™ screws. ¯ Route any cables up through the SpiroLock™ and into the ceiling structure. M6 x 6mm Lock-It™ Proceed to “Attaching the Projector Plate” on Screws page 11. Installation Instructions Page 7 Visit the Premier Mounts website at http://www.mounts.com...
Remove the nut and washer from the wedge anchors. ¯ Insert a wedge anchor into each hole. If necessary, use a hammer to lightly tap each wedge anchor into place. Page 8 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
Page 9
Do not overtighten the Lock-It™ screws. ¯ Route any cables up through the SpiroLock™ and into the ceiling structure. M6 x 6mm Lock-It™ Proceed to “Attaching the Projector Plate” on Screws page 11. Installation Instructions Page 9 Visit the Premier Mounts website at http://www.mounts.com...
See the Premier Mounts Website at www.mounts.com for compatible ceiling adapters. 1-1/2” NPT Pipe Secure a 1-1/2” NPT pipe or Premier Mounts ceiling adapter into the ceiling. This step does not require the use of the Ceiling Plate or close nipple. ®...
The number and placement of mounting points on projectors varies between projector manufacturers. Refer to the projector’s technical specifications for the number and location of the mounting points. Installation Instructions Page 11 Visit the Premier Mounts website at http://www.mounts.com...
Page 12
If not already. place the SpiroLock™ Projector Plate on top of the mounting legs with the center of the plate as close as possible to the projector’s center of Front-to-Back gravity. Center of Gravity Page 12 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
Page 13
Insert one (1) barrel cap into the end of each leveling barrel (except for the Lock-It™ security barrel). Proceed to “Attaching the Projector to the Mount” on page 14. Installation Instructions Page 13 Visit the Premier Mounts website at http://www.mounts.com...
“click”. If the locking tab is in the raised position or you did not hear a “click”, lower the projector and return to Step 1 Page 14 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
° Tighten the two set screws in the spindle to lock in your adjustments. Do not overtighten the set screws. M10 x 10mm Set Screw Installation Instructions Page 15 Visit the Premier Mounts website at http://www.mounts.com...
Use both hands to rotate the projector plate as shown to separate it from the SpiroLock™ collar assembly. ± Place the projector on a soft, flat surface and disassemble the mounting legs from the projector, if neccessary. Page 16 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the SpiroLock SPI-PRO and is the answer not in the manual?
Questions and answers