Building The Devicenet Network With The Rsnetworx Software - SEW-Eurodrive MOVIDRIVE MDX61B Manual

Building the DeviceNet network with the RSNetWorx software

4.2 Building the DeviceNet network with the RSNetWorx software
Installing the EDS Install the following files with the RSNetWorx software to build the DeviceNet network
file with the DFD11B option:
•
•
Figure 3: EDS file list
Proceed as follows:
•
•
•
Additional information on current EDS files as well as information on DeviceNet are
available at the following Internet addresses:
•
•
•
Connecting the All EDS files are automatically read in after the RSNetWorx software is started. The
device to an device list contains all devices which have been defined by an EDS file.
existing network
Manual – MOVIDRIVE® MDX61B DFD11B Fieldbus Interface DeviceNet
EDS file: DFD11B.eds
Icon file: DFD11B.ico
Select the menu item <Tools/EDS-Wizard> in RSNetWorx. You will be prompted to
enter the names of the EDS and Icon file.
The files will be installed. More details on the installation of the EDS file can be found
in the Allen Bradley documentation for RSNetWorx.
After installation, the device is available in the device list under the entry SEW Device
Profile/SEW-EURODRIVE DFD11B .
SEW-EURODRIVE: www.sew-eurodrive.com
Allen Bradley: www.ab.com
Open Device Net Vendor Association: www.odva.org
Project Planning and Startup
I
4
0 0
54173AXX
17