Operating Elements; Meaning Of The Displays - Harvia sentiotec K3 NEXT Instructions For Installation And Use Manual

Instructions for use for the user
7.

Operating elements

Fig. 6
9
8
7
6
8.

Meaning of the displays

Flashing display – self-test of the control unit,
or the heating period has been exceeded
(see 12. Troubleshooting for users on page 29)
Heating is in operation.
Heating is not in operation.
Evaporator is in operation.
Evaporator is not in operation.
The door of the sauna cabin is open.
(Only with optional door monitor)
Temperature in the cabin is too high for combi mode.
Water in the evaporator is low
(Only for combi heater with low-water connection)
Humidity control light
1
1
Display
2
2
Temperature control light
3
3
Temperature selector
4
Humidity symbol = max.
5
4
temperature for combi mode
Humidity selector
6
5
Light switch
7
ON/OFF switch
8
Time button
9
p. 22/32