9- PLUG BATTERY HOLDER
N.B.: Ensure the battery holder is pushed up
fully and is not impeding the cylinder.
10- TEST LOCK FUNCTIONALITY (To be done while door is still open)
Make Sure Room Door is Open
A - Present Test Keycard
B - Check Green & Red Lights Flash
C - Rotate Outside Lever to Check Bolt Retraction
D - Release Outside Lever, Should Move Freely
11- PROGRAM LOCK - With Jack Cable
16
✓
✗
E - Rotate Inside Lever to Check Bolt Retraction
F - Check Bolt Projection from Thumbturn & Key
Confidant RFID Kit 2 & Kit 3 Installation Guide - PK3649_T_04_16
✓
✗