Install Lock On Door; Back Plate Mount (Key Override); Rose Mount (Key Override) - Kaba Confidant RFID Kit 2 Installation Manual

7- INSTALL LOCK ON DOOR - Back Plate Mount (Key Override)
For Kit 3 lock certified EN 179 with BMH 801 lock case, please refer
to the following before installing the lock:
- Installation and maintenace manual for BMH-panic door locks
- Instructions for the use of BMH locks and hinges
See Annex A for
Exterior Applications
7- INSTALL LOCK ON DOOR - Rose Mount (Key Override)
For Kit 3 lock certified EN 179 with BMH 801 lock case, please refer
to the following before installing the lock:
- Installation and maintenace manual for BMH-panic door locks
- Instructions for the use of BMH locks and hinges
See Annex A for
Exterior Applications
To tighten set
C
screw for DIN
Screw M5
certified locks (5mm)
IMPORTANT
Confidant RFID Kit 2 & Kit 3 Installation Guide - PK3649_T_04_16
To tighten set
screw for DIN
certified locks
D
Screw M4
(4mm)
A
B
Screw M5
(5mm)
*
IMPORTANT:
For DIN lock
install this plate
*
IMPORTANT: After connecting
all cables, make sure all excess
cables are pushed inside the
hole(s) in the door.
C
IMPORTANT:
For DIN lock
install this plate
*
*
A
B
• A, B, C and D required
for security grade
D
• A always required
• C recommended
*
Post may be
attached to lock
3mm to 13mm
A
*
Post may be
attached to lock
IMPORTANT: After
connecting all cables,
make sure all excess
cables are pushed
inside the hole(s) in
the door.
3mm to 13mm
13