Amrotec MiB-9 Operator's Manual page 47

9 Daily Maintenance
The MIB-9 machine utilizes various sensors to check and detect various types of malfunction of the machine, identify the
location of banknotes in the path and to recognize the denominations of banknotes. Most of these sensors are exposed
in the bill-path and allow dust to accumulate from counting of banknotes. If these sensors are not cleaned periodically,
this may negatively affect the performance of machine and cause machine to malfunction.
Dust off these sensors and transport path as described below periodically using an Air-duster and clean with attached
cleaning cloth with this machine. If possible, perform some basic dust-off cleaning right after every heavy-uses or at
least at the end of the day. The power of the machine must be turned Off before any cleaning or dust removal is taken
place. MiB-9machine does include a Dust Tray at the Rear side which should be removed and cleaned [please ask your
service provider to perform this task]. In any case, do not use a volatile solvent for cleaning the surface or inside of the
machine.
In case of feed roller, clean them with slightly dampened cloth mixed with rubbing alcohol. While rotating one side of the
roller manually, stick the cloth to the other side of the roller to clean any debris.
47