Table of Contents
Advertisement
To prevent accidental CF function shut off, operator can disable the CF key under LOCK MENU as CF
While CF LOCK is (ON), the CF key becomes inactive. If operator wishes to disable this
LOCK (ON).
CF LOCK feature, then it will first require disabling the CF LOCK function to (OFF) by using
()()
key or numeric key followed by START/ENTER key to confirm your selection.
2. BEEP
There are two separate Beep function on this machine KEY BEEP and WARNING BEEP and they are ON
by default. "KEY" Beep function represents beep sound when pressing Keys on the control panel and if it is
turned off, BEEP will not sound off. Same for WARNING Beep feature which is turned on by Default. Anytime
there is a warning from machine operation, an
audible beep tone will sound off. To turn ON/OFF this
function, enter into their sub-menu item and use
()()
key
or
numeric
key
followed
by
START/ENTER key to confirm your selection. It is
highly recommended that both Key and Warning
beep should be turned ON all the time as it is also set as default in the software.
31
Hide quick links:
Advertisement
Table of Contents
