Amrotec MiB-9 Operator's Manual page 24

4) Each operator can accumulate their counting results and obtain own Total count by utilizing ADD key,
however, once counting results are printed out by utilizing of numeric 5 ("START") for User1 and
START/ENTER key for User2, ADD function turned off automatically.
Further, in Dual-User mode, different interface ports located at the rear side of the machine are configured as below:
"Single" or 'Dual
User' Setting
1. Single user
operation
2. Dual Operator
On (Dual user
(User1 or
operation)
(See Menu item 4. SETTING in Chapter 7 and submenu "8.DUAL USER SET" at page 34).
*** Specifications above may change without prior notice. Interface software integration must be done by third party
24
Communication ports
RS232C USB
USB
*1)
Printer
Stick)
*1)
PC -
Printer /
PC
*3)
2)
LAN RJ11
Customer
PC
Display unit
*2)
PC
PC
1 Customer
(User1
Display Unit can
*4)
or 2)
be connected
software developer.
Remark
USB Port is only used for inserting
USB stick for software upgrade.
*1) *2) To print or Transmit data to
PC, press PRINT key
To transmit data to PC:
*3) User1 uses 'START/ENTER'
key
*4) User2 uses numeric '5' key