Set 'Menu' And Its Parameters; User Menu - Amrotec MiB-9 Operator's Manual

7

Set 'MENU' and its Parameters

USER MENU

To set a function and its parameters, enter USER MENU by pressing MENU key on the Control Panel. The 'USER
MENU' screen is shown in exact at the right side.
Press UP / DOWN key to move from one menu item to the next
followed by START/ENTER key on the right side of the Control panel to
confirm the selection or you can directly move from one menu item to
the next by pressing corresponding numeric key. For example, to move
to menu item "SETTINGS", just press numeric "4" key and
START/ENTER key to confirm the selection. Press MENU key to return
to MENU from sub-menu or press "C" key to entirely exit from the Menu,
sub-menu and return to main screen. The factory default settings are
set up as below:
26