Amrotec MiB-9 Operator's Manual page 17

■ Orientation mode (ORENT)
The face of each banknote has 2 orientations  Up and Down. After operator sorts out front face and rear face of
banknotes of a single denomination in a stack, operator can also separate banknotes by sole orientation by using this
mode. Within this Mode, machine delivers banknotes with Up orientation to Stacker and banknotes with Down
orientation to Reject pocket along with non-recognized banknotes. To identify if any non-recognized
banknotes in reject pocket, press the Display key three times.
■ Count mode (COUNT mode)
In Count mode, the machine counts banknotes by its pieces without denominating a
denomination and denomination value. To change to Count mode, press MODE key
until "COUNT" is displayed on the LCD screen. Display shows counted pieces for
Stacker (S), Total (T) as well as qty of Rejected banknotes for various reasons.
CF (Counterfeit) Detector On/Off
Operator can turn On / Off CF detection by pressing CF key. If "CF" appears on LCD
screen, it means the counterfeit detection function is activated.
17