Amrotec MiB-9 Operator's Manual page 38

becomes necessary in case of a false alarm or rejection of genuine banknotes due to suspect errors, Operator
is able to readjust (lower) the factory preset sensitivity settings (from 00 - 05) for these detectors equipped with
this machine. Lower Value sensitivity level refers to lower sensitivity of each of these detectors. To determine
the appropriate sensitivity level for each of these detectors, trained operator is recommended to start settings
from lower level to higher level for each of these detectors and one detector at a time.
To change the sensitivity level, enter "6.SENSITIVITY SETTING" followed by ENTER and numeric key to
scroll through different detector sub-menu and choose the level by using ()() key. To confirm your selection,
press START/ENTER key, press MENU key to return to Menu screen or exit from this sub- menu by pressing
[C] key on the control panel.
2. DOUBLE LEVEL: (Only for Trained Operator or Service-Provider)
MiB-9 is equipped with a double detection sensor to prevent 2 banknotes to pass through as one. Appropriate
Double sensitivity level as 10 [00-20] has been adjusted from factory, however, if it is necessary to trouble
shoot double note error, trained operator or service-provider able to make slight adjustment of this level
around default value. Please be note that any value over 10 may lead to single banknote is rejected as double
note.
3. HOPPER LEVEL: (Only for Trained Operator or Service-Provider)
MiB-9 is equipped with hopper sensor to detect present of a banknote, thus machine starts counting operation.
38